Installation guide

Configuration and Operation
53
7.3.8 Application
The Application screen enables control over the input and output alarms. If, for example, an event is
recognized by the system, an input or output alarm and message is generated.
Figure 52: Application Screen
The alarm input and output connectors are shown in the table below.
Table 5: Input/Output Alarm Connections
Pin No.
Designation
1
Input (-)
2
Input (+)
3
Output (-)
4
Output (+)
Alarm Switch
The Administrator can enable or disable the alarm function (Off/On).
Alarm Type
Select an alarm type (Normal close or Normal open) that corresponds to the alarm application.
Alarm Output
Define the normal alarm output signal as Normal Close or Normal Open, according to the current
alarm application.