Installation guide

Quasar CM-4251 Series User and Installation Guide
48
7.3.3.4 UPnP
The UPnP page enables the Universal Plug-and-Play protocol on your network devices.
Figure 46: UPnP Screen
UPnP Settings
 Enable UPnP – If UPnP is enabled and a camera is discovered on the LAN, the icon of the
connected camera appears in My Network Places, allowing direct access, as seen below.
Figure 47: Direct Access to Camera with UPnP Enabled
Note:
To enable this function, make sure the UPnP component is installed on your
computer. Refer to Install UPnP Components for the Windows 7 and Windows 8
procedure.