Installation guide

Quasar CM-4251 Series User and Installation Guide
2
2.1 Features
Following are key features of the CM-4251 series cameras:
 H.264 and MJPEG compression
 HTTP streaming MJPEG
 Progressive scan CMOS sensor
 Edge motion detection
 Motion detection with
region of interest masking
 Historical motion-detection levels
detected /recorded at frame levels.
 Detection event driven alarms
 Alarm input driven events
 Relay output actions on alarm
 Built-in web application/web
server
 FTP upload (up to two
locations)
 Upload alarm images to FTP
 Dual HTTP notification server
support (up to two servers)
 Send images on alarm to
e-mail
 E-Mail SMTP alarm notification (up
to two e-mails)
 MicroSD/SDHC recording support
 Record snapshots to SD
card on alarm
 Sequential snapshot numbering
 SNMP v1/v2/v3 and SNMP traps
 Security IP restricted
access allow/deny list
 UPnP support
 Electronic day/night (ICR)
 Analog video output
 BNC analog output
 Privacy masks
 WDR and ATW
 3DNR image noise reduction
 ONVIF support
 RTSP support
 Supports PoE /12VDC/24VAC
 Multiple users
 Group permissions
 Per-user permissions
 Tampering detection and
notification
 Two encoder streams
available
 Low-lux mode and backlight
compensation
 Vandal-proof IP66 enclosure
(CM-4251-11-I)
 Motorized lens
(CM-4251-11-I)
 Infrared LED illuminator
(CM-4251-11-I)
Note:
MJPEG is not supported by Latitude.