Quick Start Guide

•To set the Intensity, Color Temp, +/- Green, Saturation and Hue:
•When connected wirelessly to a DMX transmitter or Lead Lamp, the Wireless signal
strength will be shown as vertical bars.
Getting Started
2. The selection carets “> <” will move from the “>Function<” to the “>Value<”.
4. The selection carets “> <” will move from the “>Value<” back to the “>Function<”.
> <
Intensity
100%
> <
Intensity
87%
> <
Intensity
87%
> <
Intensity
100%
1. 2.
3. 4.
DMX
001
•To link an RR or R2 lamp to a CRMX /Wireless DMX transmitter:
5
1. Press or until desired function is shown on screen, and press to select.
3. Press or to set the value. Press to save.
1. Double tap . Go to Wireless Mode->Wireless DMX.
2. If the “Wireless” Status Light is flashing, press and hold to unpair.
3. On the DMX transmitter, tap the link button to pair.
4. The “Wireless” Status Light will start to flash and turn solid Green once paired.