Quick Start Guide

Output Mode
Rig Mode
16
> Output Mode
•Rig mode is used to define how you want to turn on the lamp. When Rig Mode is enabled, the lamp will turn on when it is powered.
This mode is preferred when the light is rigged on a spot that is remote or difficult to reach.
Normal Output: Normal Operating Temperature, standard lamp output.
High Output: High Operating Temperature, maximum output.
Low Output: Gives maximum resolution in the low dimming section of the lamp. Maximum power is about 25% of
High Output.
•There are 3 different Output Modes, which are used to increase the light output or the resolution in different areas of the dimming range.
•When Rig mode is disabled, after being powered connecting power, the Power button must be pressed. This is recommended for
normal operation.