Quick Start Guide

14
Wireless Control Menu
> Wireless Mode
> Wireless DMX
> Bluetooth
> Wifi
> Off
> Wireless DMX Settings*
> Wifi Settings*
> Bluetooth Settings
>Reset
> Status Lights On/Off
> Reset Wireless Settings to Default
Lumen Radio CRMX wireless DMX. Press and hold to Clear. Tap transmitter to pair.
Connect to the lamp over Bluetooth.
Connect to a wireless network to receive Art-Net over Wifi.
Turns off all Wireless functionality.
Shows the Hardware and Firmware of the CRMX TimoTwo.
Turns the lamp into a wireless access point to allow mobile device to set up wireless settings.
Reset Bluetooth connection.
Turns off status lights for use when lamp is seen on camera.
Reset All Wireless Settings to factory default.
Tip: Double Tap to bring up the Wireless Control menu.
*See the full Manual for Detailed Descriptions of the Wireless DMX Settings and Wifi Settings.