Quick Start Guide

> Wired Mode
> DMX
> Ethernet
> DMX Settings
> DMX Channel
> Terminate
> Ethernet Settings
> View IP Address
> IP Address Mode
> DHCP (Auto)
> Static
> IP Address, Subnet Mask, Gateway
> Universe
> DMX Channel
> Ethernet Mode
Wired Control Menu
13
Choose DMX512 or Ethernet Mode to Wire Control the light.
Control the lamp with DMX512.
Control the lamp with sACN or Art-Net.
Set the DMX Channel 001 to 508 (Does not allow address to be outside of 512).
Terminate the DMX Signal when last in line.
Show the IP address automatically received through DHCP or the Static IP address set.
Set the IP Address Mode.
Allow the lamp to obtain the IP address from the router automatically.
Allow the lamp to set the IP address manually.
Enter the IP address, Subnet mask, and Gateway.
Set the Universe for the lamp.
Set the DMX Channel 001 to 508 (Does not allow address to be outside of 512).
Choose the Ethernet protocol: sACN/Art-Net, sACN Only, Art-Net Only.