SDS

Marker Inks
ACCO Brands Corporation Page 5 of 10
Biological occupational exposure limits
Component CAS-No. Parameters Value Biological
specimen
Basis
2-Propanol 67-63-0 Acetone 40 mg/l Urine ACGIH - Biological
Exposure Indices
(BEI)
Remarks End of shift at end of workweek
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved
under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands.
Body Protection
impervious clothing, Flame retardant antistatic protective clothing., The type of protective
equipment must be selected according to the concentration and amount of the dangerous
substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face
respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator
cartridges as a backup to engineering controls. If the respirator is the sole means of
protection, use a full-face supplied air respirator. Use respirators and components tested
and approved under appropriate government standards such as NIOSH (US) or CEN
(EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
a) Appearance Form: liquid
Colour: coloured
b) Odour alcohol-like
c) Odour Threshold No data available
d) pH 4 - 12
e) Melting point/freezing
point
No data available