9.3

The settings that control when these updates occur are located in the Collaboration Setup
dialog box (File menu).
On the Updates tab, the On Opening, Before Output, and While Working check boxes
control how the project updates its Resource definitions from the shared Job Jackets file
when the project is opened, before it is sent to output, and while you are working on the
project.
To control how often changes to shared Resources are written to and read from a shared
Job Jackets file, use the Updates tab of the Collaboration Setup dialog box (File menu).
The Job Jackets tab of this dialog box shows the name of the active project's Job Jackets
structure, the status (shared or not shared), the path to the Job Jackets file (if any), and
the name of the active project's active Job Ticket. The buttons at the bottom of the tab are
as follows:
• Change Jacket: Use this button to link this project to a Job Ticket in a different Job Jackets
file.
• Change Ticket: Use this button to link this project to a different Job Ticket.
• Get Update: If the automatic updating options at the top of this dialog box are turned
off, you can use this button to perform a manual update.
• Turn sharing On/Turn sharing Off: Use this button to detach the active project from
the shared Job Jackets file. The project's Job Ticket is moved to an embedded Job Jackets
structure within the project file.
A GUIDE TO QUARKXPRESS 9.3 | 379
JOB JACKETS