8.5

• Baseline Position: Choose an option in this area to specify positioning for the baseline
in the design grid.
To specify the offset origin, click Place at, choose Topline, Center (Up), Center (Down),
or Bottomline in the from the drop-down menu, and then enter a percentage value in
the field to specify the baseline position relative to the topline, centerline, or bottomline.
To read the offset origin from a font, click Read From Font and then select a font from
the drop-down menu. The baseline defined for the selected font determines the baseline
position for each line in the grid. The percentage value displayed below the font list
indicates the relationship between the baseline and the bottomline in the font's design.
• Offset: To control where the first line of the design grid is placed on the page or in the
box, choose Topline, Centerline, Baseline, or Bottomline and enter a measurement value
in the field.
• Adjust: Click to display the Adjust Lines Within Margins dialog box for master page
grids, or the Adjust Lines Within Box dialog box for text box grids. For more information,
see "Adjust Lines Within Margins dialog box."
• Lines within margin or Lines within box: This field displays the number of lines that
can fit on a page or in a box, based on the settings above.
• Cells per line: This field displays the number of cells that can fit on a line, based on the
settings above.
Adjust Lines Within Margins dialog box
Use the Adjust Lines Within Margins dialog box (Master Guides & Grid > Adjust) to
change the number of cells per line and the number of grid lines that fit within the margins
of a master page. Many of the controls in this dialog box are also in the Text Settings tab;
changes are reflected in both locations.
A GUIDE TO QUARKXPRESS 8.5: PLUS EDITION | 129
TEXT AND TYPOGRAPHY