9.3

• To make a curved line segment, click and drag wherever you want the next point positioned.
A point with two curve handles displays. You can control the curve's size and shape by
dragging a curve handle.
• To make a corner point, press Option/Alt before you click. If you click and hold, you can
control the radius of the corner point by dragging a curve handle.
• To add a point to an existing segment of the shape, click the line segment where you want
the point to be.
• To delete a point from the active shape while you are drawing it, click the point.
4
To finish the line, double-click.
When any of the drawing tools are active, you can press Command/Ctrl to temporarily
switch to the Select Point tool. When the Select Point tool is active, you can press
Command+Option/Ctrl+Alt to temporarily switch to the Item tool.
Line modes for straight lines
There are four line modes: Endpoints, Left Point, Midpoint, and Right Point. Depending
on the mode you choose in either the Line tab (Item > Modify) or the Measurements
palette (Classic or Space/Align tabs), line length and position will be described differently.
• Endpoints mode: The X1 field indicates the horizontal position of the first end-point; the
Y1 field indicates the vertical position of the first end-point. The X2 field indicates the
horizontal position of the last end-point; the Y2 field indicates the vertical position of the
last end-point.
• Left Point mode: The X1 field indicates the horizontal position of the leftmost end-point;
the Y1 field indicates the vertical position of the leftmost end-point.
• Midpoint mode: The XC field indicates the horizontal position of the midpoint of the
line; the YC field indicates the vertical position of the midpoint of the line.
• Right Point mode: The X2 field indicates the horizontal position of the rightmost
end-point; the Y2 field indicates the vertical position of the rightmost end-point.
Resizing lines
You can resize active straight lines using any of the following methods:
•
Select the Item tool and move the Arrow pointer over an Understanding handles to display
the Resizing pointer. Click and drag the handle to a new location to reduce or extend the
length of the line.
• Choose Item > Modify (Command+M/Ctrl+M), then click the Line tab. Click the Mode
drop-down menu to display the four mode options (see "Line modes for straight lines").
Choose Left Point, Midpoint, or Right Point to display a Length field. Enter values in
the Length field to precisely change the length of a line, then click OK.
A GUIDE TO QUARKXPRESS 9.3 - PLUS EDITION | 75
BOXES, LINES, AND TABLES