2021

JOB JACKETS
You can use the Edit Job Ticket dialog box (File > Job Jackets > Modify Job Ticket) to
assign a Layout Specification to a layout in the active project.
Working with Rules and Rule Sets
A Rule is a test that is executed against the active layout when you choose File > Job
Jackets > Evaluate Layout.
Each Rule can test one condition. For example, a Rule might state that all text
characters should be set to overprint. Rules also can include descriptions, policies
(to indicate to the layout artist whether a given condition is mandatory,
recommended, or forbidden), and instructions for fixing problem situations.
The standard procedure for working with Rules and Rule Sets is:
Create Rules (see “Creating Rules: Advanced mode“) and add them to a Rule Set 1.
(see “Adding Rules to a Rule Set: Advanced mode“). This is typically done by a job
definer, possibly working with an output specialist.
Associate the Rule Set with a layout using a Job Ticket template (see “Applying a 2.
Rule Set to a layout“). This is typically done by the job definer.
Use the Rule Set to evaluate the layout (see “Evaluating a layout“). This is 3.
typically done by a layout artist.
The following topics describe each of the above procedures in detail.
A GUIDE TO QUARKXPRESS 2021 | 523