2020

OUTPUT
To modify output settings, click Options. Use the panes in the resulting dialog 4.
box to control the format of the exported file.
To use an EPS output style, choose an option from the EPS Style drop-down •
menu. To create an EPS output style using the current settings, choose New
EPS Output Style.
Use the General pane to specify the scale of the EPS file, the format of the •
EPS file’s preview, the format of the data (ASCII, Binary or Clean 8 Bit),
whether to treat the page’s white areas as transparent or opaque in the EPS
file, and whether to output the EPS file as a spread.
Use the Color pane to choose an output setup for the EPS file and to select •
which plates should be included in the output.
Use the Fonts pane to specify which fonts are embedded within the •
exported EPS file.
Use the Registration Marks pane to specify the positioning, width, and •
length of registration marks in the EPS file.
Use the Bleed pane to designate a symmetric or asymmetric bleed type and •
specify bleed distance around the EPS file.
Use the Transparency pane to turn transparency on or off, and to control •
the resolution of flattened items in the EPS file.
Use the JDF pane to indicate whether a Job Definition Format (JDF) file •
should be created at the same time as the EPS file. You might choose to do
this if you’re using Job Jackets in a JDF workflow.
Use the Advanced pane to choose whether the EPS adheres to PostScript •
Level 2 or PostScript Level 3.
The Summary pane will display a summary of all the choices you have •
made in the previous panes.
Click OK. (To capture the current settings without creating an EPS file, click
5.
Capture Settings.)
Click Save.
6.
Exporting a layout in PDF format
To export the active layout in PDF format:
Choose File > Export as > PDF. The Export as PDF dialog box displays.
1.
Enter a page range in the Pages field. 2.
To use an existing output style, choose an option from the PDF Style drop-3.
down menu.
Check the Open PDF after Export check box to open the PDF after the file has
4.
been exported.
To modify output settings, click Options. Use the panes in the resulting dialog
5.
box to control the format of the exported file.
A GUIDE TO QUARKXPRESS 2020 | 437