2015

Table Of Contents
4
Choose Item > Callout Anchor > Associate with Callout Anchor. The item or group
becomes a callout, and a line displays between the callout and the callout anchor.
Callout anchor associated with a callout
5
Configure the callout anchor. There are two ways to configure a callout anchor:
To apply a callout style to the callout anchor, display the Callout Styles palette
(Window menu) and click the name of the callout style, or choose Item > Callout
Anchor > Callout Styles > [Callout Style Name]. For more information, see "Working
with callout styles."
To edit the settings of the callout anchor directly, choose Item > Callout Anchor >
Edit Callout Settings. If a callout style has been applied to the callout anchor, any
changes you make will override the callout style's settings.
For information on how to configure a callout anchor or callout style, see
"Configuring a callout anchor."
Configuring a callout anchor
The process of configuring a callout anchor is essentially the same whether you are
configuring a callout style or directly configuring a callout anchor.
To configure a callout anchor:
1
Select the callout anchor and choose Item > Callout Anchor > Edit Callout Settings.
The Edit Callout Settings dialog box displays.
2
To control how the callout aligns horizontally, use the controls in the Align callout
horizontally relative to area. (The Offset field lets you adjust the horizontal
positioning of the callout from where it would otherwise be.)
If you choose Spread from the Align callout horizontally relative to drop-down menu
and specify a horizontal offset, that offset is inverted on left-facing pages. This allows
you, for example, to configure a callout to always be .25" inside of the inside margin;
on a right-facing page, such an offset moves the callout to the right, but on a left-facing
page the offset must move the callout to the left.
98 | A GUIDE TO QUARKXPRESS 2015
BOXES, LINES, AND TABLES