2015

• If you are printing to a PostScript level 3 or later output device, or to a device that uses
PostScript 2 version 2015 or later, check Optimize Font Formats.
• To download all fonts used in the layout , check Download Layout Fonts. To control
which fonts are downloaded, uncheck Download Layout Fonts and then check
Download for each font you want to download. You can control which fonts are listed
by choosing an option from the Show drop-down menu.
• To download all fonts that are required by imported PDF and EPS files, check Download
Imported PDF/EPS Fonts.
• To retrieve a list of the fonts included on the active printer, click Scan Printer. Note
that this process can take a long time; you may want to check Use PPD Font Settings,
and use your printer manufacturer's PPD file.
Color pane
Use the Color pane to control color output.
• To print all colors on one page, choose Composite from the Mode drop-down menu.
To print to a device that handles in-RIP separations, choose Separations from the
Mode drop-down menu. For more information about composite output, see "Printing
color composites." For more information about separations, see "Printing color separations."
• To specify an output setup for the output device, choose an option from the Setup
drop-down menu. For more information about color management, see "Source setups
and output setups."
• To specify default halftone shape and frequency, use the Halftones and Frequency
drop-down menus. The Printer option on the Halftones drop-down menu lets the
output device determine all halftone settings.
Registration Marks pane
Use the Registration Marks pane to include crop marks, registration marks, and bleed
marks in the output. Crop marks are short vertical and horizontal lines printed outside
the page's final trim size, indicating where to cut the page. Registration marks are symbols
that are used to align overlaying plates. Bleed marks indicate where page bleeds end.
• To include crop marks and registration marks on every page, choose Centered or Off
Center from the Mode drop-down menu.
• When you choose Centered or Off Center, the Width, Length, and Offset fields are
available. Values in the Width and Length fields specify the width and length of the
crop marks. Values in the Offset field specify the distance of the crop marks from the
page edge.
• To include marks indicating bleed location, select the Include Bleed Marks option.
Layers pane
Use the Layers pane to specify which layers to output and which layers to suppress.
Print and PDF Outputdialog box only: To apply the settings in the Layers pane to the
layout, check Apply to Layout.
306 | A GUIDE TO QUARKXPRESS 2015
OUTPUT