10.1

If you choose Spread from the Align callout horizontally relative to drop-down menu
and specify a horizontal offset, that offset is inverted on left-facing pages. This allows you,
for example, to configure a callout to always be .25" inside of the inside margin; on a
right-facing page, such an offset moves the callout to the right, but on a left-facing page
the offset must move the callout to the left.
3
To control how the callout aligns vertically, use the controls in the Align callout vertically
relative to area. (The Offset field lets you adjust the vertical positioning of the callout
from where it would otherwise be.)
4
To allow the callout to be manually repositioned, check Allow manual positioning of
callout. If you subsequently move the callout, the values in the Offset fields will be
automatically updated to reflect the new position of the callout.
To prevent the callout from being manually repositioned, leave this box unchecked.
5
To prevent the callout from extending beyond the page margins, check Keep within
margins.
6
Click OK.
Working with callout styles
Callout styles make it easy for you to apply often-used settings to callout anchors. To
create, edit, duplicate, or delete callout styles, use the Callout Styles dialog box (Edit >
Callout Styles). You can also use this dialog box to append callout styles from other
projects.
Callout Styles dialog box
84 | A GUIDE TO QUARKXPRESS 10.1
BOXES, LINES, AND TABLES