9.5

Table Of Contents
The Debug and Information settings produce large logs that grow rapidly, so you might
want to use these settings for troubleshooting only.
Using a proxy server
Some networks route network traffic through a proxy server for reasons of efficiency or
security. To use a proxy server for all requests and responses between QuarkXPress Server
Manager and QuarkXPress Server:
1
Display the Proxy Server Settings tab of the Global Settings pane of the
QuarkXPress Server Manager interface.
Proxy Server Settings tab
2
Check Use a Proxy Server for LAN.
3
Enter the proxy server's DNS name or IP address in the Address field.
4
Enter the proxy server's port number in the Port Number field.
5
Enter the proxy server's user name in the User Name field.
6
Enter the proxy server's password in the Password field.
Generating automatic e-mail messages
You can configure a QuarkXPress Server Manager server to automatically generate and
send e-mail messages if particular events occur. To configure the QuarkXPress Server
Manager server to automatically send e-mail messages:
1
Display the SMTP Settings tab of the Global Settings pane of the QuarkXPress Server
Manager interface.
2
Enter a valid SMTP server name or IP address in the SMTP Server field and then enter the
corresponding port number in the Port Number field.
3
Enter the e-mail address to which messages should be sent in the Admin Email ID field.
A GUIDE TO QUARKXPRESS SERVER 9.5 | 331
QUARKXPRESS SERVER MANAGER