9.5

Table Of Contents
DeconstructModifyConstructElement type
PICTURE?, (CONTENT? |
(PARAGRAPH |
RICHTEXT)*),
INTERACTIVITY?)
Attributes
Not applicable.Specifies the width of the
box as a percentage of the
Specifies the width of the
box as a percentage of the
WIDTH CDATA #IMPLIED
width of the parent columnwidth of the parent column
or text box, in all supportedor text box, in all supported
measurement units. The
default WIDTH value is 100%.
measurement units. The
default WIDTH value is 100%.
The default height for a
picture box is the height of
The default height for a
picture box is the height of
the picture it contains at athe picture it contains at a
scale of 100% (or afterscale of 100% (or after
SCALEUP is applied, ifSCALEUP is applied, if
specified). The default widthspecified). The default width
is the width of the picture atis the width of the picture at
that scale. Ifthat scale. If
SCALEUP="false" and theSCALEUP="false" and the
picture is too big to fit thepicture is too big to fit the
WIDTH value, the picture is
scaled down until it fits.
WIDTH value, the picture is
scaled down until it fits.
The height of a text box is
determined by the amount
The height of a text box is
determined by the amount
of content it contains after
text-fitting (if any).
of content it contains after
text-fitting (if any).
Not applicable.Applicable only if you are
inserting a picture into the
Applicable only if you are
inserting a picture into the
SCALEUP CDATA (true |
false) #IMPLIED
box, and only if the picturebox, and only if the picture
is narrower in width thanis narrower in width than
the box. Ifthe box. If
SCALEUP="true", theSCALEUP="true", the
picture is sized up to fill thepicture is sized up to fill the
full width of the box. Iffull width of the box. If
SCALEUP="false", theSCALEUP="false", the
picture is not resized. Inpicture is not resized. In
both cases, the height of theboth cases, the height of the
box is adjusted to match the
height of the picture.
box is adjusted to match the
height of the picture.
Not applicable.Specifies whether the
anchored box is aligned with
Specifies whether the
anchored box is aligned with
ALIGNWITHTEXT (ASCENT
| BASELINE) "BASELINE"
the ascent or the baseline of
the line in which it occurs.
the ascent or the baseline of
the line in which it occurs.
Not applicable.Specifies the offset of the
anchored box from the
ascent or baseline.
Specifies the offset of the
anchored box from the
ascent or baseline.
OFFSET CDATA #IMPLIED
238 | A GUIDE TO QUARKXPRESS SERVER 9.5
MODIFIER SCHEMA (ANNOTATED)