9.5

Table Of Contents
DeconstructModifyConstructElement type
SH_LINE = LineSH_LINE = LineSH_LINE = Line
SH_ORTHLINE = Orthogonal
line (restricted to 90-degree
angles)
SH_ORTHLINE = Orthogonal
line (restricted to 45-degree
angles)
SH_ORTHLINE = Orthogonal
line (restricted to 45-degree
angles)
SH_SPLINEBOX = Freehand
shape
SH_SPLINEBOX = Freehand
shape
SH_SPLINEBOX = Freehand
shape
SH_NONE = Available to
define in XDK API
SH_NONE = Available to
define in XDK API
SH_NONE = Available to
define in XDK API
SH_ORTHPOLYLINE = Can be
defined in XDK
SH_ORTHPOLYLINE = Can be
defined in XDK
SH_ORTHPOLYLINE = Can be
defined in XDK
SH_SPLINELINE = Freehand
line
SH_SPLINELINE = Freehand
line
SH_SPLINELINE = Freehand
line
SH_ORTHPOLYBOX = Available
to define in XDK API
SH_ORTHPOLYBOX = Available
to define in XDK API
SH_ORTHPOLYBOX = Available
to define in XDK API
SH_USER = Available to
define in XDK API
Note: You cannot specify
PICTURE content for a box
if its SHAPE attribute is set to
SH_LINE.
Note: You cannot specify
PICTURE content for a box
if its SHAPE attribute is set to
SH_LINE.
Specifies the number of the
page where the upper left
Specifies the number of the
page where the upper left
Specifies the number of the
page where the upper left
PAGE CDATA #IMPLIED
corner of this box or line iscorner of this box or line iscorner of this box or line
located. If the page numberlocated. If the page numbershould be created. If the
is followed by *, the boxis followed by *, the boxpage number is followed by
origin is on the leftorigin is on the left*, the box origin is on the
pasteboard. If the pagepasteboard. If the pageleft pasteboard. If the page
number is followed by **, thenumber is followed by **,number is followed by **,
box origin is on the right
pasteboard.
the box origin is on the right
pasteboard.
the box origin is on the right
pasteboard.
Note: This attribute
determines where a box or
Note: This attribute
determines where a box or
Note: This attribute
determines where to create
line is, regardless of whichline is, regardless of whicha box or line, regardless of
PAGE element the box or line
occurs within.
PAGE element the box or line
occurs within.
which PAGE element the box
or line occurs within.
Specifies a rotation angle for
a box or line as a
Specifies a rotation angle for
a box or line as a
Specifies a rotation angle for
a box or line as a
ANGLE CDATA #IMPLIED
floating-point value betweenfloating-point value betweenfloating-point value between
360 degrees and 360
degrees.
360 degrees and 360
degrees.
360 degrees and 360
degrees.
Identifies the layer that a
box resides on.
Identifies the layer where a
box or line is located.
Identifies the layer where a
box or line should be
created.
LAYER CDATA #IMPLIED
Note: Boxes on
non-displayed layers are not
included. This means you
can use the LAYER URL
parameter as a filter when a
layout contains multiple
layers.
Identifies the corner style (if
any) applied to this box.
Identifies the corner style (if
any) applied to this box.
Identifies the corner style (if
any) applied to this box.
CORNERSTYLE (ROUNDED |
CONCAVE | RECTANGLE |
BEVELED) #IMPLIED
230 | A GUIDE TO QUARKXPRESS SERVER 9.5
MODIFIER SCHEMA (ANNOTATED)