8.5

In the Max Listens field, enter the maximum number of requests to be queued up for
processing while waiting for an open connection. An alert displays if this value exceeds
the maximum number of listens. The acceptable range of values is from 1 to 32. The default
value for this field is 20.
In the Default Buffer Size field, enter the total size (in kilobytes) of the HTTP buffer. The
HTTP buffer is the size of the data block that is sent to the client from the server as part
of the HTTP response. The smaller the block size, the less memory consumed by the
application. Large blocks facilitate faster performance, but might cause memory shortages
in other parts of the application. The acceptable range of values is from 16KB to 256KB.
The default value for this field is 32KB.
In the Connection Timeout field, enter the total time in seconds before an HTTP
connection should time out. The client must send a request within this period. The
acceptable range of values is from 1 second to 32,767 seconds. The default value for this
field is 120 seconds.
Check Realm Verif. for Admin. Requests to enable the User Name, Password, and
Confirm fields. These fields let youcontrol access to administrative parameters and features.
You must enter valid values that contain at least four characters in the User Name,
Password, and Confirm fields, and you can enter up to 32 characters. This box is
unchecked by default.
Check Use Connection Filters to enable controls that let you enter and modify IP addresses
and subnet masks in the connection filters list. This box is unchecked by default.
• Click Insert to display the Insert Connection Filter dialog box, in which you can enter
an IP address between 1 and 254 and a subnet mask between 0 and 255. The maximum
number of allowed IP addresses/subnet masks is 128.
• Click Modify to display the Modify Connection Filter dialog box, in which you can
specify an action for a particular IP address, edit an IP address, and edit a subnet mask.
Each field in the Modify Connection Filter dialog box accepts a value between 0 and 255.
The default setting is Deny Connection.
• Click Remove to delete the selected IP address from the connection filters list.
•
Click or to move the selected IP address up or down in the connection filters list.
• If no rules have been applied to an IP address, you can select the IP address and click Allow
Connections to allow the IP address to be used or click Deny Connections to prevent the
IP address from being used. The "allow" and "deny" actions are performed on IP addresses
in the order they display in the connection filters list.
Email (Tab)
Click the Email tab in the Server Configuration dialog box (QuarkXPress Server > Server
Configuration) to display controls that let you set up automatic e-mail messages to warn
of license expiration.
22 | A GUIDE TO QUARKXPRESS SERVER 8.5
THE QUARKXPRESS SERVER USER INTERFACE