7.0

LOGGING (TAB)
Server Configuration dialog box
Click the Logging tab in the Server Configuration dialog box to control how
errors and transactions are logged.
Logging tab of Server Configuration dialog box
The log folder contains two log files: The transaction log and the error log. You
can configure the system to save the log folder to your computer or to a file
server that is accessible over a LAN or a WAN, as long as the drive containing
the folder can be mounted.
LOGGING ENABLED (CHECK BOX)
Server Configuration dialog box Þ Logging tab
Check Logging Enabled to enable the Log Folder field and then enter the path
to the folder or click
Browse and navigate to the folder.
You cannot specify the QuarkXPress Server application folder as the document
pool directory.
LOG ERRORS (CHECK BOX)
Server Configuration dialog box Þ Logging tab
Check Log Errors to set the system to record unsuccessful transactions in the
log file.
LOG TRANSACTIONS (CHECK BOX)
Server Configuration dialog box Þ Logging tab
Check Log Transactions to enter every non-error response returned from
transactions on QuarkXPress Server into the transaction log.
LOG DETAILED TIMING DATA (CHECK BOX)
Server Configuration dialog box Þ Logging tab
Depending on the render type, certain transactions must include transac-
tion timing data. Check
Log Detailed Timing Data to include the following
transaction timing data (measured in milliseconds) in the transaction log for
each transaction:
•
Connection acceptance and closure time: The duration between the network
connection opening and closing time.
SERVER CONFIGURATION DIALOG BOX
12
|
CHAPTER 2: THE QUARKXPRESS SERVER USER INTERF
ACE