7.0

PARAMETER DESCRIPTION
FITPICTURETOBOXPRO Use this parameter to proportionally scale a picture to
a picture box while keeping horizontal and vertical scale
proportional. For example,
<FITPICTURETOBOXPRO>TRUE
</FITPICTURETOBOXPRO>
scales a picture to the largest
size that will allow the entire picture to fit entirely
within the picture box without stretching the picture
in either direction.
FLIPHORIZONTAL Use this parameter to flip a picture horizontally within
a picture box. For example,
<FLIPHORIZONTAL>TRUE
</FLIPHORIZONTAL> flips a picture horizontally.
FLIPVERTICAL Use this parameter to flip a picture vertically within
a picture box. For example,
<FLIPVERTICAL>TRUE
</FLIPVERTICAL> flips a picture vertically.
OFFSETACROSS Use this parameter to specify the horizontal position
of a picture within its picture box. Horizontal offset
is measured in points from the left side of the picture
box to the left side of the picture. For example,
<OFFSETACROSS>25</OFFSETACROSS> places the left
side of the picture 25pt to the right of the left side of
the picture box.
OFFSETDOWN Use this parameter to specify the vertical position of a
picture within its picture box. Vertical offset is meas-
ured in points from the top of the picture box to the
top of the picture. For example,
<OFFSETDOWN>25
</OFFSETDOWN>
places the top of the picture 25pt
below the top of the picture box.
SCALEACROSS Use this parameter to scale a picture horizontally to
between 10% and 1,000% of its imported size. For
example,
<SCALEACROSS>25</SCALEACROSS> sets a
picture’s horizontal scale to 25%. This parameter does
not affect picture box size.
SCALEDOWN Use this parameter to scale a picture vertically to
between 10% and 1,000% of its imported size. For
example,
<SCALEDOWN>25</SCALEDOWN> sets a picture’s
vertical scale to 25%. This parameter does not affect
picture box size.
SKEW Use this parameter to skew a picture by a number of
degrees within its picture box. For example,
<SKEW>25
</SKEW>
skews a picture within its picture box by 25
degrees. The valid range for skewing is from –75
degrees to +75 degrees.
MODIFIER XTENSIONS SOFTWARE
156
|
CHAPTER 4: XTENSIONS SOFTW
ARE