7.0

3 B
ased on the
M
odel
y
ou specify, select an output profile from the
P
rofile
d
rop-
down menu. If you need to load custom profiles, use the
Profile Manager
dialog box (Utilities menu).
4 If you choose CMYK or RGB from the Model drop-down menu, you can
configure the output setup to simulate output to a particular output device
(output setup) and rendering intent. You might choose to do this, for example,
if you want to use an RGB output device to simulate a layout’s appearance
when printed to a CMYK press. To make use of this feature, check
Proof
Separations
and then choose options from the Output Simulation and
Rendering Intent drop-down menus.
5 To finish the output setup, click OK.
SERVER XTENSIONS MANAGER
The Server XTensions Manager command displays the Server XTensions
Manager
dialog box.
SERVER XTENSIONS MANAGER (DIALOG BOX)
Server/QuarkXPress Server Þ Server XTensions Manager
Use the Server XTensions Manager dialog box to control which XTensions
modules load and to create and modify sets of XTensions modules.
XTensions Manager dialog box
OUTPUT SETUPS
136
|
CHAPTER 2: THE QUARKXPRESS SERVER USER INTERF
ACE