2020

Table Of Contents
QUARKXPRESS SERVER MANAGER
Using a proxy server
Some networks route network traffic through a proxy server for reasons of efficiency
or security. To use a proxy server for all requests and responses between
QuarkXPress Server Manager and QuarkXPress Server:
Display the Proxy Server Settings tab of the Global Settings pane of the 1.
QuarkXPress Server Manager interface.
Proxy Server Settings tab
Check Use a Proxy Server for LAN. 2.
Enter the proxy server’s DNS name or IP address in the Address field. 3.
Enter the proxy server’s port number in the Port Number field. 4.
Enter the proxy server’s user name in the User Name field. 5.
Enter the proxy server’s password in the Password field. 6.
Generating automatic e-mail messages
You can configure a QuarkXPress Server Manager server to automatically generate
and send e-mail messages if particular events occur. To configure the QuarkXPress
Server Manager server to automatically send e-mail messages:
Display the SMTP Settings tab of the Global Settings pane of the QuarkXPress 1.
Server Manager interface.
Enter a valid SMTP server name or IP address in the SMTP Server field and then 2.
enter the corresponding port number in the Port Number field.
Enter the e-mail address to which messages should be sent in the Admin Email 3.
ID field.
If this SMTP server requires validation, enter a valid user name in the User 4.
Name field and a valid password in the Password field.
A GUIDE TO QUARKXPRESS SERVER 2020 | 407