2017

Table Of Contents
QUARKXPRESS SERVER MANAGER
420 | A Guide to QuarkXPress Server 2017
Add QuarkXPress Server dialog box
Enter the QuarkXPress Server instance’s DNS name or IP address in the3.
Name/IP Address field.
Enter the QuarkXPress Server instance’s port number in the Port Number field.
4.
If the QuarkXPress Server instance is running with the HTTPS protocol, check5.
HTTPS.
To specify an alternate name for the server, enter a value in the Alias field. The
6.
Alias value displays in the Manage Servers pane of the QuarkXPress Server
Manager interface.
If you choose to use a particular ping document for this server (see “
Ping7.
document“), make sure the project file is in the QuarkXPress Server instance’s
document pool and then enter the project’s file name in the Ping Document
field. The ping document is used only if the global Ping Type is set to Ping
Document (see “
Using other global settings“). Note that if you do not set a ping
document here, and no global ping document is set (see “Using other global
settings“), an error message might display to indicate that the server is registered
but inactive.
Enter the QuarkXPress Server instance user name and password in the Admin
8.
User and Admin Password fields.
To specify that QuarkXPress Server Manager should begin sending rendering
9.
requests to this QuarkXPress Server instance, check Enable.
To restrict this server to one or more particular types of rendering, check the10.
appropriate boxes in the Request Binding area. To add additional render types
(for example, render types provided by QuarkXPress Server XTensions software),