2016

Table Of Contents
DeconstructModifyConstructElement type
SH_NONE = Available to
define in XDK API
SH_NONE = Available to
define in XDK API
SH_NONE = Available to
define in XDK API
SH_ORTHPOLYLINE = Can
be defined in XDK
SH_ORTHPOLYLINE = Can
be defined in XDK
SH_ORTHPOLYLINE = Can
be defined in XDK
SH_SPLINELINE = Freehand
line
SH_SPLINELINE = Freehand
line
SH_SPLINELINE = Freehand
line
SH_ORTHPOLYBOX = Available
to define in XDK API
SH_ORTHPOLYBOX = Available
to define in XDK API
SH_ORTHPOLYBOX = Available
to define in XDK API
SH_USER = Available to
define in XDK API
Note: You cannot specify
PICTURE content for a box
if its SHAPE attribute is set
to SH_LINE.
Note: You cannot specify
PICTURE content for a box
if its SHAPE attribute is set
to SH_LINE.
Specifies the number of the
page where the upper left
Specifies the number of the
page where the upper left
Specifies the number of the
page where the upper left
PAGE CDATA #IMPLIED
corner of this box or line iscorner of this box or line iscorner of this box or line
located. If the page numberlocated. If the page numbershould be created. If the
is followed by *, the boxis followed by *, the boxpage number is followed by
origin is on the leftorigin is on the left*, the box origin is on the
pasteboard. If the pagepasteboard. If the pageleft pasteboard. If the page
number is followed by **,number is followed by **,number is followed by **,
the box origin is on the
right pasteboard.
the box origin is on the
right pasteboard.
the box origin is on the
right pasteboard.
Note: This attribute
determines where a box or
Note: This attribute
determines where a box or
Note: This attribute
determines where to create
line is, regardless of whichline is, regardless of whicha box or line, regardless of
PAGE element the box or
line occurs within.
PAGE element the box or
line occurs within.
which PAGE element the
box or line occurs within.
Specifies a rotation angle
for a box or line as a
Specifies a rotation angle
for a box or line as a
Specifies a rotation angle
for a box or line as a
ANGLE CDATA #IMPLIED
floating-point valuefloating-point valuefloating-point value
between 360 degrees and
360 degrees.
between 360 degrees and
360 degrees.
between 360 degrees and
360 degrees.
Identifies the layer that a
box resides on.
Identifies the layer where a
box or line is located.
Identifies the layer where a
box or line should be
created.
LAYER CDATA #IMPLIED
Note: Boxes on
non-displayed layers are
not included. This means
you can use the LAYER URL
parameter as a filter when
a layout contains multiple
layers.
Identifies the corner style
(if any) applied to this box.
Identifies the corner style
(if any) applied to this box.
Identifies the corner style
(if any) applied to this box.
CORNERSTYLE (ROUNDED
| CONCAVE | RECTANGLE
| BEVELED) #IMPLIED
Specifies a skew value for
the contents of this box or
Specifies a skew value for
the contents of this box or
Specifies a skew value for
the contents of this box or
SKEW CDATA #IMPLIED
line as a floating-pointline as a floating-pointline as a floating-point
value between 75 degrees
and 75 degrees.
value between 75 degrees
and 75 degrees.
value between 75 degrees
and 75 degrees.
A GUIDE TO QUARKXPRESS SERVER 2016 | 239
MODIFIER SCHEMA (ANNOTATED)