1.1

WORK & TURN SCENARIO
Let’s say you’ve got a four-page brochure and the printer is planning to print
this 4-up as a work-and-turn job and has requested composed flats. In the
Layout pane, click the 4-Up tab, choose Work & Turn from the Type drop-down
menu and either
Saddle Stitch or Perfect Bound from the Binding drop-down
menu (
General area). Enter values in the other fields as necessary, then click
the
Preview tab. Enter 1–4 in the Range field. Choose an option from the
Registration drop-down menu, then click Print.
WORK & TUMBLE SCENARIO
Using the same example as work-and-turn, let’s say the printer requests film
for a work-and-tumble job. The only change you need to make is to choose
Work & Tumble from the Type drop-down menu in the Layout pane. Because
Work & Tumble prints two flats with the same contents, you only need to
print both flats if the printer requests two sets of film.
SPLIT WEB SCENARIO
In this example, say you’re printing a 16-page book to a web press with two
roll stands. Each press unit prints an 8-page signature. Both rolls are printed
at the same time and collated in line to be final folded into a 16-page stapled
book. In the Layout pane, click the 8-Up tab and then choose Split Web from
the
Type drop-down menu (Units defaults to 2 Out), choose Saddle Stitch
from the Binding drop-down menu (General area). Proceed as usual.
SAMPLE IMPOSITION SCENARIOS
42
|
CHAPTER 3: QUARK IMPOSER FOR QUARKXPRESS