1.1

THE REGISTRATION AREA FIELD
Enter a value in the Registration Area field to specify the thickness of the
registration area or trim margin that displays along each edge of the print
area of the page. The value can be between 12 pt and 288 pt.
THE PAGE BLEED FIELD
Enter a value in the Page Bleed field to define the bleed zone around the print
area of the page. Trim lines and crop marks are offset this distance from the
print area to allow for page bleed. The minimum value is 0 and the maximum
value depends on the value in the Registration Area field.
THE HORIZONTAL TRIM AND VERTICAL TRIM FIELDS
Enter values in the Horizontal Trim and Vertical Trim fields to define the
size of the printed page. Values default to the page dimensions of the active
QuarkXPress layout.
PREVIEW CONTROLS: PROXY, ZOOM FIELD, PAGE DROP-DOWN MENU
You can quickly display a particular area of the style’s page by clicking the
corresponding point on this proxy.
The preview controls in the upper-right corner of the Edit MarkIt Style dialog box.
• Proxy: To display a specific area in the page preview, click the proxy page or
drag the red square.
•
Zoom field: Enter a value in the field from 10% to 1200% to specify the
magnification of the page preview. Click in another field or press
Tab to
have Quark MarkIt accept the value and change the magnification.
• Page drop-down menu: If the layout page size matches the trim size, you can
choose a specific page from the active layout to preview.
THE POSITION MARKS RELA
TIVE TO TRIM CHECK BOX
Check Position Marks Relative to T
rim
to allow Quark MarkIt to adjust the
relative position of the marks when the QuarkXPress layout size does not
match the style’
s trim size. Uncheck this to lock the mark positions to the
trim size. For precise mark placement, the trim size specifi
ed in the style
and the QuarkXPress layout page size should match.
THE EDIT MARKIT STYLE DIALOG BOX
14
|
CHAPTER 2: QUARK MARKIT