1.1

THE PLACEMENT PANE
T
he
P
lacement
p
ane controls where marks are placed. Look here for information
about how the controls in the
Placement pane work.
The Placement pane of the Item Marks dialog box.
THE POSITION AREA
The Position controls determine the position of the Quark Item Marks in
relation to the selected items or page.
• The
Vertical field specifies the vertical position of the trim area on the page.
Enter a value to specify how far from the top of the items or page the trim area
should be placed. Or, choose
Top, Center, or Bottom. If Top is selected, the trim
area is placed flush against the top edge of the page. If
Center is selected, the
trim area is centered vertically on the page. If
Bottom is selected, the trim area
is placed flush against the bottom of the page.
• The Horizontal field specifies the horizontal position of the trim area on the
page. Enter a value to specify how far from the left edge of the page the trim
area should be placed. Or, choose
Left, Center, or Right. If Left is selected, the
trim area is placed flush against the left edge of the page. If
Center is selected,
the trim area is centered horizontally on the page. If
Right is selected, the trim
area is placed flush against the right edge of the page.
The Position settings can affect the maximum values for the Width and Height
fields in the Crops pane’s Trim and Bleed areas.
THE LAYERS AREA
If you want to place marks on a specific layer (Window Þ Layers), choose it
from the
Place Marks On drop-down menu. You can also create a layer for the
marks by entering a name in the field.
THE PLACEMENT PANE
10
|
CHAPTER 1: QUARK ITEM MARKS