1.1

•
When
C
MYK Tags
i
s checked, a white text box containing the letters “CMYK,”
with each letter colored its corresponding color is placed outside the trim area,
and is located at left.
• If text is entered in the
Notes field, a white text box containing the text
in 7-point Helvetica is placed outside the trim area at the bottom. The
Notes
field is limited to 1,024 characters.
THE MARK SPECIFICATIONS AREA
The Mark Specifications controls determine the characteristics of the crop
and registration marks.
• The
Line Weight field determines the thickness of the crop, bleed, and margin
marks. The default value is 0.25 point.
• The Line Length field determines the length of the crop, bleed, and margin
marks. The default value is .25".
• The Mark Size field determines the size across of the target marks and the
size across of each block comprising the color bars and gray bars. The default
value is .25".
• The
Mark Offset value determines how far from the trim the marks (crop, bleed,
margin, and registration marks) will be placed. The default value is .25".
USING THE MARKS PANE
The easiest way to see the effects of controls in the Marks pane is to review the
examples shown here with a picture box measuring 24
×24 picas (4"×4").
EXAMPLE 1
In addition to Crop Marks in the Trim area, this example shows Targets
checked. Notice how the target marks are centered between the crop marks on
each side.
Targets are centered between crop marks.
THE MARKS PANE
8
|
CHAPTER 1: QUARK ITEM MARKS