User`s manual

Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 33 of 66
4) Turn the knob to change the LCD contrast and you will directly see the result of the adjustments. Here are some images
showing how the contrast changes turning the knob:
5) When the needed contrast level is set, press the knob. The cursor will move on the left:
6) To confirm the entered settings, select Confirm Changes and press the knob (or, to quit the menu without changing the
previous setting, select Ignore Changes and press the knob).
 For information about Confirm Changes and Ignore Changes commands Ö 8.3.
9.9 Set Clock menu
Refer to par. 7.1.b in which this menu is already explained.
After you entered the clock settings, don’t forget to confirm them: select Confirm Changes and press the knob (or, to quit the
menu without changing the previous setting, select Ignore Changes and press the knob). For information about these commands
Ö7.3.
9.10 Info Page menu
This menu shows the contact information of Quark (email, technical support telephone number) in order to get in touch with it in case
of support is needed.
1) From the main menu (Ö
9.3), select the Info Page option:
2) Press the knob. The Info Page will show the following information:
• QUARK elect. systems: brand name
• email: [e-mail]: email address of Quark
• 0039 02 45073447: Quark Technical Support telephone number.
3) To quit the menu and come back to the main menu, press the knob.