User`s manual

Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 32 of 66
9.5.c Encoder Test menu
This menu allows to check the correct operation of the digital encoder connected to the knob.
1) From the Debug Page (Ö
9.5), select Encoder Test:
2) Press the knob. The Encoder Test menu will be shown:
3) Turn the knob and check if the A and B values are changing. As an example, the following image was taken after having
turned a bit the knob starting from the previous image:
4) To quit and go back to the Debug Page, press the knob.
9.6 Language menu
Refer to par. 7.1.c in which this menu is already explained.
After setting the language, you are still inside the main menu, so no operation are necessary to come back to it. Instead, you might
decide to come back to the working page by turning the knob clockwise in order to move the cursor > upward to the left of Working
Page (the first option), then press the knob to come back to the working page.
9.7 Set Function, Size menu
It’s a special password-protected technical menu. For detailed information, see the dedicated Chapter 10.
9.8 Set LCD Contrast menu
1) From the main menu (Ö 9.3), select the LCD Contrast option:
2) Press the knob. The LCD Contrast menu will show the current level of the LCD contrast (in this example 140):
3) Ensure that the cursor is placed to the left of LCD Contrast as in the previous image (otherwise turn the knob to move it),
then press the knob. The cursor will move on the right of LCD Contrast: