User`s manual

Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 27 of 66
8 USE OF THE MENUS
8.1 Use of the multifunction knob
The multifunction knob is used to surf the menu with its submenus and set/check their parameters. It can be used in 3 ways:
• By turning it clockwise (fig. 1) - while a menu is being displayed, this moves the > cursor upwards.
• By turning it counterclockwise (fig. 2) - while a menu is being displayed, this moves the > cursor downwards.
• By pressing it as it was a normal pushbutton (fig. 3) - while a menu is being displayed this activate the option currently
pointed by the > cursor. While a password-related menu is displayed, this enter the value set in the digit pointed by the Λ
cursor.
8.2 Navigating the menu
In the menu navigation, generally speaking, the use of the knob is the following:
1) From the working page (Ö 9.2):
2) Press the knob. The display will show the main menu (which is split in two pages):
3) Turn the knob until the > cursor on the left points one of the over stated menus.
4) Press the knob to select the needed menu.
5) If necessary (according to the selected menu), repeat one or two times these last two steps in order to access to further
submenus (e.g. in the Debug Page).
6) According to the needed option is accessed, you can:
• See the shown parameter(s) as explained in each dedicated paragraph, then go to step
8).
• Change the selected parameter(s). In this case go to step
7).
7) As explained in each dedicated paragraph, use the knob to set the needed parameter, then be sure to confirm it (usually by
means of the menu Confirm Changes - Önext paragraph).
8) Exit the menu with the appropriate commands (see each dedicated paragraph) and come back to the working page as
explained in each dedicated paragraph.
figure 3
figure 1 figure 2