User`s manual

Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 22 of 66
6.4.c Connecting to the exciter
, Warning: The exciting rated power of the amplifier is from 25 to 30W. In order to avoid any damage to the equipment,
make sure that the driving power never exceeds 30W.
Proceed in the following way:
1) Connect the exciter to an independent AC power line.
2) Connect the exciter’s R.F. output to a suitable dummy load.
3) Switch the exciter on.
4) Set the exciter R.F. output power to zero.
5) Check that the correct FM frequency of the exciter is set.
6) Switch the exciter off and connect the R.F. IN connector of the amplifier
[12] to the exciter’s output through a shielded N-N
cable.