Getting Started Guide
77
TroubleshootingTroubleshootingTroubleshootingTroubleshooting
Before assuming your KG-1000G is defective, please check the following list of possi-
ble problems and solutions. Using the RESET option provided in the menu can also be
used to reset the transceiver back to factory standard settings and programming.
Problem Solution
Receive indicator is on but
no sound is heard.
▪
Check volume level.
▪
Disable CTCSS/DCS or be sure setting matches
incoming transmission.
▪
Check squelch settings.
Keypad is unresponsive
▪
Check if keypad has been locked.
▪
Check if other keys are currently pressed
Unwanted interference is
being received.
▪
Enable CTCSS or DCS tone to lter out unwanted
transmissions.
▪
Use a dierent channel
Voice pause ever 3 seconds Check if the “PRICH-SW” (Priority scanning switch)
is turned on.