Getting Started Guide

Advanced OperationAdvanced Operation

After selecting the CTCSS menu setting (RX-CTC or TX-CTC), enter the desired

CTCSS code via the keyboard and then press [MENU] to conrm.

For example, to set the receiving CTCSS tone to 100.5Hz:

In standby, press [MENU] + [2] + [6], the screen will display: RX-CTC, press MENU,

and input [1] + [0] + [0] + [5], then press [MENU] to conrm, and [EXIT] to return

to standby.

How to Set Non-Standard DCS

e KG-1000G supports non-standard DCS codes ranging from 000-766, except any

code with the digit 8 or 9. For example, 680.719 is not a legitimate non-standard DCS

code.

After setting a non-standard DCS code, press the [LOCK] key to set it as a Positive or

Negative code, or press the [SCAN] key to select OFF.

After selecting the DCS menu setting (RX-DCS or TX-DCS), enter the desired DCS

code from the keypad on the hand microphone, press [LOCK] to select the Positive or