Getting Started Guide
43
Basic OperationBasic Operation
(9) [SQL] Squelch Level Hotkey
e SQL function allows adjusting of the squelch setting. Press the [SQL] key, then
press the UP / DOWN arrow keys or enter 0-9 to choose the desired squelch level.
Press [MENU] to conrm, then press [EXIT] to save the setting and exit the menu.
(10) [SCAN] Scanning Hotkey
In standby, press the [SCAN] key on the hand microphone to initiate a channel or
frequency scan. In Frequency (VFO) mode, the radio will scan by the step frequency.
In Channel (MR) mode, the radio will scan the channels programmed into it, starting
from the current channel. Pressing the UP/DOWN keys while scanning will change
the direction of the scan from low to high (UP) or high to low (DOWN). Press any
key to stop the scan. Refer to MENU 10 (p 50) for more information on the types of
scans available.
Simultaneous Scanning on AB Areas
e A and B areas can perform a scan at the same time. To do this, press [SCAN] to
activate the scan on the A Area , press [MAIN] to go to the B area, then press [SCAN]