Getting Started Guide
32
Basic Operation
Changing the Primary Area
With Dual Display on, press the BAND key on the front panel or the number 1 key on
the hand microphone to switch the primary area. You will see the down arrow indicator
above the frequency or channel move from one area to the other.
With Dual Display o, pressing the BAND key will switch the currently active area as
well, but will also turn o the previously active area. For example, with Area “A” on and
Area “B” o, pressing BAND would turn on Area “B” and turn o Area “A”.
Frequency and Channel Modes
e KG-1000G supports tuning frequencies via two methods: channel and frequency
modes.
In channel mode, frequencies that have been saved can be selected from the channel
list. is is the default mode and is the most convenient way to access commonly used
frequencies. e transceiver is pre-congured with 30 GMRS channels, but allows users
to save custom channels as well (up to 999). In channel mode, turning the Channel/
Frequency Knob or pressing an arrow key will tune to the next channel in the list.