Getting Started Guide

Installation and Setup

Installing the Front Panel Support Bracket

e front panel can be installed detached from the transceiver body. is allows for con-

siderable exibility when considering where to install the KG-1000G. For an installa-

tion with a detached front panel, you will use the included support bracket.

1. Secure the support bracket using

the supplied screws. Be sure to leave

room for the front panel extension

cable to be inserted through the

back.

Gap facing upward

Specification: 2.3X8 (4pcs)

2. Feed the extension cable through the center of the support bracket, then connect to

the front panel. Attach front panel to support bracket as shown.

/ S