Getting Started Guide

23
OperationOperation
Individual channels can be added or removed from the scan list using the Scan Add
menu item (p 33).
Scanning CTCSS / DCS Codes
e KG-905G is equipped with the ability to scan an incoming signal for a CTCSS or
DCS tone and update the current channel’s tone settings once the tone is identied.
To activate CTCSS / DCS scan, press the [MENU] key and navigate to the SCN-CD
menu item. Press [MENU] again to enter the menu item and you will see “SEEK QT”
on the screen.
e scan will begin when a signal is received. e scan will stop when the signal ends
and resume from where it left o the next time the signal is received, until it identies
the correct tone. Use the [UP]/[DOWN] arrow keys to scan in a dierent direction.
Use the [PF2] side key to toggle between scanning the standard CTCSS, positive DCS,
and negative DCS tone list.
See the SCN-CD menu item (p 34) for more information.