User's Manual

Professional FM Transceiver
52
51
How to operate
Setting reverse frequency function
When using reverse frequency function, the transceiver transmit-and receivefreuency will interchange
and the setting of CTCSS and/or DCS encode and decode will interchange.
Operating reverse frequency function:
In standby, press and this will turn on reverse frequency function, press again and this will
turn off reverse frequency function.
SCAN
T
-
R
SCAN
T
-
R
Be careful, don't set VOX-T to a long time.
This transceiver total has 20 levels, unit: 100ms
In standby, press +number and the screen will display
Press enter, arrowhead aim at "5", press / and select one of level between 1 and 20 or 0
not allow delay transmit, press to confirm, then press to return to standby.
5
0
Companding (COMP) ---- MENU 51
COMP: Use voice compress technology to reduce the noise when on talking, make the voice clear.
In standby, press + number and the screen will display
Press enter, arrowhead aim at "OFF" position, press / to select ON or OFF.
Press to confirm, then press to return to standby.
5
The transceiver has a menu which resets VFO and ALL messages.
When you use RESET VFO all parameters of menu will return to factory default.
When you use RESET ALL all menu and channel parameters will return to factory default.
Setting reset (RESET) ---- MENU 52
All message reset (ALL):
In standby, press + number the screen will display
Press enter, press / and select ALL, press and the screen will display
Press again and the screen will display
When reset has worked well, the transceiver will auto power off and auto switch on again.
2.
5
2
1. MENU reset (VFO):
In standby, press + number and the screen will display
Press enter, press / select VFO, press key and the screen will display
Press again and the screen will display
When the reset has worked well the transceiver will auto power off and auto switch on again.
5
2