User's Manual

How to operate

When press PTT key the screen will display

When you release PTT the screen will display

Now the receiving frequency is

The transmit frequency is

Setting VOX-T (VOXT) ---- MENU 50

ANI CODE edit (ANI) ---- MENU 48

Any transceiver of group must edit different ANI code.

The purpose of setting VOX-T is to avoided the problem: When after transmitted, transceiver will return

to receivedmode immediately, but you can't ensure whether last part of calling can be transmitted or not,

so you can set a proper VOX-T then makes calling can be transmitted exactly.

NOTE

Because this transceiver has different of 3 bits, 4 bits and 5 bits, so the length of ANI CODE must keep the

same as which used in group.

ANI CODE only can be programmed via KG-699E programming software.

Professional FM Transceiver

In standby press + number and the screen will display

Press enter, press number 0 to 9 to select offsetfrequency. Press to confirm, then press

to return to standby.

The frequencyshift direction and offsetfrequency can only be programmed when the transceiver works

in frequencymode, in order to let transmitting and receiving under different frequency.

Follow the next steps:

Set working frequency.

Set frequencyshift direction and offsetfrequency.

Example: In frequencymode, the transceiver will work on receive frequency 450.025MHz and

transmit frequency will be 460.025MHz.

In frequencymode, order input , press + + +

and select positive offset (+); press + , then press + + + + numberkey

to select 10.000+ + and the frequencyshift direction plus offsetfrequency are complete.

The screen will display