User's Manual

How to operate
47
Professional FM Transceiver
48
Offsetfrequency is the difference between the transmit and receive frequency. The transceiver offset
range can be from 0 to 99.950MHz.
Setting offsetfrequency (OFF-SET) ---- MENU 47
NOTE
!
If you want to set CTCSS, D.C.S, W&N etc functions on parameter please setting before stored. Then it can
store with frequency in channel.
The transmitting only stored transmit frequency, if you want to store MENU function and parameter, please
store with the receiving.
If you want to store by manual, in frequencymode, and the channel should be vacant, then you can go on
operation of store receiving and transmitting or you can only go on the operation of storing transmitting.
If the channel is not vacant and you want to go on the operation of storing receiving and transmitting, you
should delete channel.
1.
2.
When the transceiver works in frequency mode, input , +
+ , then press or / key select CH-20, press key to confirm,
voice prompt will tell you it is stored, press to exit;
Then input + + + + + and voiceprompt
will tell you it is stored + press to exit.
The dis-channel is stored.
3.
Example:
You want 450.025MHz for receive and 460.025MHz for transmit and stored in CH-20, then act as
follows:
4
5
2
0
5
4
2
0
4
0
2
0
5
6
4 4
0
4
In standby, press + number and the screen will display
Press enter, press / to select the channel you want to delete, press to confirm.
The select channel and message are deleted, press to return to standby.
Delete channel (DEL-CH) ---- MENU 45
5
4
Frequencyshift means that:
Setting frequencyshift direction (SFT-D) ---- MENU 46
1.
2.
3.
The transmit frequency is higher than receive frequency. This is called positive offset (+)
The transmit frequency is lower than receive frequency. This is called negative offset.(-)
Turn off frequencyshift.
In standby, press + number and the screen will display
Press enter, press / and select one of +/-/OFF. Press to confirm, then press to
return to standby.
4
6