User's Manual

How to operate
43
Professional FM Transceiver
44
NOTE
!
to exit FM radio, please press sidedey 1 again.
You can use the software to edit the channel of FM radio, make the radio can display the frequency and
radio's name on LCD screen, after you have succeed in programming, press the sidekey 1 to turn on FM radio,
now you not only can use the channel knob to switch channel, but also can use / to switch.
If the radio don't have channel knob, you can use / to switch FM radio channel.
Signal calling key
In standby, press + number and the screen will display
Press enter, arrowhead aim at “EMCALL” position, press / select one of function from
CALL01 to CALL15, press to confirm, then press to return to standby.
Setting topkey (PF2) ---MENU 39
The topkey offers two kinds of function:
EMCALL: Start up alarm function
CALL01-CALL15:Signal calling key
Select EMCALL function
In standby, press + number and the screen will display
Press enter, arrowhead aim at “EMCALL”, press / and select EMCALL. Press and
confirm, then press to return to standby.
When you have selected EMCALL, in standby press the topkey and from your speaker an alarm will
sound and the red and green lamp will flicker at the same time. Press the topkey again to exit.
9
ABR
Define MONI key (MONI) ---- MENU 40
This function is defined for squelch diagram.
Total have 2 kinds function can be selected.
CONTIN: Should always press side key 2 all the time to persist turn off squelch diagram.
PRESS: Just need press side key 2 one time to persist turn off squelch diagram.
In standby, press + number and the screen display
4
0
NOTE
!
CALL01-CALL15: Means the information code which has been set as calling signal, when PF2 has been set
as one kind of CALL01-CALL15, then press PF2 one time, meanwhile the LED A and B flicker each other.
When the information code of signal has been set as the same as others and other functions are also the
same, then press PTT you can communicate each other, also you can communicate when the LED is flickering.
9
ABR