User's Manual

Setting sidekey 1(PF1)---MNEU 38
This transceiver sidekey 1 has 5 kinds function can be selected:
1.FM: FM radio key
2. CALL: Signal calling at present.
3. NO-SUB: Cancel receive DCS or CTCSS.
4. JP-PRI: Switch to priority scan channel.
41
How to operate
Professional FM Transceiver
42
NOTE
!
Manual lock: In standby, press for more than 2 seconds will lock keyboard, release keyboard
press for more than 2 seconds.
#
#
Setting power on message (PONMSG) ---- MENU 37
Transceiver power on message:
FULL: Full display BATT-V: Display the current voltage of batterypack MSG: display "Best Wishes"
In standby, press + number and the screen will display
Press enter, arrowhead aim at "FULL" position, press / and select one of FULL/BATT-V/
MSG, Press to confirm, then press to return to standby.
7
NOTE
!
When in FM radio, the present frequency or channel are still in standby, if transceiver receives a signal,it will
return to two-way radio, After the signal disappeared 5 seconds, it will auto return to FM radio. If you want
5. JP-EMC: Switch to emergency calling mode.
1. Select FM radio function.
In standby, press the sidekey 1 to switch on FM radio,this FM radio is frequency modulation, frequency
range is 87-108MHz, and the screen will display
a. In FM radio, press / or number key to select program.
b. Press , you can check the working frequency and channel, after 2 seconds the screen will
resume , the radio works in normally when you are on operation.
c. Press PTT, sidekey 2 and topkey, it will into the relevant operation.
When you want to turn off radio, press sidekey 1 again.
When you turn on the FM radio, you should install supplied antenna.
In standby, press +number and the screen will display
Press enter, arrowhead aim at "FM" position, press / and select one of the FM/CALL/
NO-SUB/JP-PRI/JP-EMC, press to confirm, press to return to standby.
8