User's Manual

How to operate

Professional FM Transceiver

Setting transmit segment when in dual standby (TDR-AB) ---- MENU 33

Edit Channelname

At least one channel should have been stored.

The transceiver should be work in channelmode.

Enter the channelname edit menu, then press / to select character, press to select edit position.

2. Via keyboard of transceiver.

Edit step

If the transceiver works in frequencymode, set the workmode as NAME in the display then

press and power on again.

If the transceiver works in CH mode, then go through MENU 34 to set display to NAME.

Select the desired channel, press + + + and then the screen will display 6 rails,

press / and select character then press , press / again to select the second

character, after selecting the sixth character press to confirm, press to exit.

The screen will display the channelname and show the order of this channel on top right corner.

NOTE

Setting this function you must turn on dualstandby at first.

When in dualstandby,press PTT to transmit A segment or B segment.

The transeiver will transmit on A segment or B segment when switch on the dualfrequency.

In frequencymode, press + number and the screen will display

Press enter, arrowhead aim at "A" position, then press / selected A or B. Press to

confirm, then press to return to standby.

Setting A segment channel display mode (CA-MDF)---MENU 34

This transceiver has three selectable display modes: channelorder display, channelfrequency

+ channelorder display, channelname + channelorder display.

In standby, press + number and the screen will display

1. Channelorder display mode

Press enter, press / select CH and the screen will display

Press to confirm, then press to exit.