User's Manual

How to operate

Professional FM Transceiver

Edit channelname (CHNAME) ---- MENU 32

Channelname can be made up of 26 letters (A to Z), 10 numbers (0 to 9) or (?) (+) (-), with any of

the 3 last symbols.

Channelname can have a length of maximum of 6 bits or you can edit one of the bits from 1 to 6.

When you select the (-) symbol it means that the bit is blank.

Edit method

1. Via KG-699E software.

Setting ringtime(RING-T)---MENU 31

It will switch on the speaker when it is over the preset ring time.

In standby, press + number and the screen will display

Press enter, arrowhead aim at “0” position, press / to select the time of the ring between

0 and 10. Press to confirm, then press to return to standby.

Emergency calling channel (EMC-CH)---MENU 29

Select any channel which have set for emergency calling.

In standby mode, press + number and the screen will display

Press key enter, arrowhead aim at “CH-000” position, press / select the desired channel,

Press confirm, then press to return to standby.

ABR

Select ringmode (RING-M)---MENU 30

Setting calling ring means after the transceiver receive the matching signal, it will be announced from

the speaker.

This transceiver has 4 kinds ringmode can be selectable.

SOUND:Turn on ring

BIV: Turn on libration

BOTH: Turn on ring and libration

OFF: Turn off all.

In frequencymode, press + number and the screen will display

Press key enter, arrowhead aim at “SOUND” position, press / select one of SOUND/

BIV/BOTH/OFF. Press confirm, then press to return to standby.

NOTE

This transceiver has 10 different steps of ringtime of which every step is 1 second difference, this means that

0 will switch off the ring.