User's Manual

How to operate

Professional FM Transceiver

Setting signal information (S-INFO) ---- MENU 27

Emergency calling type (EMC-TP)---MENU 28

This transceiver has 3 kinds function.

1. ALARM: Field alarm

2. ENI: Distant alarm

3. BOTH: Field + distant alarm

In frequency mode, press + number and the screen will display

Press key enter, arrowhead aim at “ALARM” position, press / select ALARM/ENI/BOTH

Press to confirm, then press to return to standby.

*OFF: The radio can’t transmits the ID code when turn off all.

In frequency mode, press + number and the screen will display

Press key enter, arrowhead aim at “OFF” position, press / select one of BOT/EOT/BOTH

/OFF. Press to confirm, press to return to standby.

NOTE

When alarming, if this menu does not be set as "0", but be set one of the number between 1 and 30, then the

setting delayed time will be delayed to transmit signalcode and alarmcode.

When the frequency has set WDTS/DTMF /2-TONES/5-TONES signals, if this menu does not be set as "0", but

be set one of the number between 1 and 30, then the setting delayed time will be delayed to transmit signalcode.

Setting ANI ID CODE transmit (PTT-LT) ---- MENU 26

Setting ANI ID CODE on transmit is needed to send ANI everytime when you press your PTT key.

1-30: Permit transmit ANI delayed time from 1 to 30. Unit: 100ms

0: Do not delay to transmit ANI ID CODE

In standby, press + number and the screen will display

Press enter, arrowhead aim at "5" position, press / select 1 to 30 for delay transmit ANI

or OFF to switch off ANI delay transmit. Press to confirm, then press to return to standby.

This function means select information code which be used to program signal.

In frequency mode, press + number and the screen will display

Press enter, arrowhead aim at "1" position, press / select from 1 to 15.

Press to confirm, then press to return to standby.

NOTE

In frequencymode or channelmode, only be set as ENI and BOTH, then can use the alarm channel to alarm.

In frequencymode or channelmode, if you do not set alarm channel, then it will alarm at the present frequency or channel.