User's Manual

How to operate

Professional FM Transceiver

3. Setting mutemode must be set as AND,the details see to the MENU (24)

4. Press PTT: Setting time according your need, the details see to the MENU (25)

5. Turn on ringtime alarm and set ringtime (Set when needed); The details see to the MENU (30) and

MENU (31)

6. Setting PTT-LT

In fact, you can choose the time of signal delay before transmit. The details see to the MENU (26)

NOTE

Every transceiver in the group needs a unique ANI ID CODE.

Edit method: see to the MENU 48.

2. Setting all calls, group calls and selective calls.

NOTE

Using any transceiver of group must be set turning on WDTS optional signal.

Setting WDTS optional signal, the details see to the MENU 23.

X XXXX

Grouplist A unique ANI ID CODE

1 to 9 groups From 0000 to 9999 maximum

This is how to build up ANI.

NOTE

Every transceiver using in the group must be set the same frequency, channel and parameter.

NOTE

This transceiver has ID memory function, after you used all calls, group calls or selective calls, then you want

to transmit again, the ID code is the same as last time you transmitted. If you want to transmit new ID code,

please press before transmitting.

This transceiver has difference of 3,4,5 bit. so all the ANI ID CODE in the group have better set the same bit.

When the bit of transmitter is lower than receive's, you can use the to make up, then you can go on

all calls, group calls or selective calls.

a. Using All calls

Press PTT to transmitting, after transmitting ANI ID CODE, input + directly by keyboard.

b. Using group calls

Press PTT to transmitting, after transmitting ANI ID CODE, input [group number] + + directly

by keyboard (Using three ID codes as an example).

c. Using selective calls

Press PTT to transmitting, after transmitting ANI ID CODE, input the ANI ID CODE you want to call by

keyboard.