User's Manual

How to operate

Professional FM Transceiver

Setting scanmode (SC-REV) ---- MENU 22

This transceiver will stop scanning when detect the frequency(memory channel)

of signal.According to the method of restoring that you choose,the transceiver will

resume or stop scanning.

The transceiver has three scanmodes.

TO: After signal in channel disappears the transceiver will start scanning if without any operation within

5 seconds.

CO: After the transceiver stopped on a signal it will resume scanning again in 3 seconds when signal

disappears.

SE: Scanning will stop when receives a signal.

In standby, press + number and the screen will display

Press enter, arrowhead aim at "TO" position, press / and select TO, CO or SE.

Press to confirm, then press to return to standby.

Switch on scanning: Press the via keyboard.

2 2

Setting option signal (OPTSIG) ---- MENU 23

In standby, press + number and the screen will display

Press enter, arrowhead aim at "WDTS" position, press / select one kind of WDTS/DTMF

/2-TONES/5-TONES, Press to confirm, then press to return to standby.

All calls, group calls and selective calls

This transceiver has the functions of transmitting ANI,editing ANI and DTMF decoding, without by other

tool, it can accomplish the operation of all calls, group calls and selective calls.

How to program all calls, group calls and selective calls.

1. Program ANI

This transceiver has 3 kinds of method:

*. ANI-XXX

*. ANI-XXXX

*. ANI-XXXXX

XXX: Means can program 3 bits ANI ID CODE.

XXXX: Means can program 4 bits ANI ID CODE.

XXXXX: Means can program 5 bits ANI ID CODE.